Skip to content
Energy costs and calculations

Energy Revolution System Electricity Savings: How to Calculate Real Results

Can the Energy Revolution System reduce your electricity bill? The answer depends on a detail that advertising often skips: how much net electrical energy a completed project can verifiably deliver to useful loads, compared with the energy and money required to operate it. A percentage quoted in a sales presentation is not a substitute for those measurements.

By Best Purchase Store Editorial Team · Published · 6 min read

Editorial disclosure: This is an independent educational guide on an affiliate review website. We may earn a commission if you buy through a link on our main review. We have not independently tested the Energy Revolution System's power output, and nothing here is electrical installation advice.
On this page
  1. First, understand watts versus kilowatt-hours
  2. Estimate your household's monthly consumption
  3. What would a claimed 80% bill reduction require?
  4. Four measurements you need before believing savings figures
  5. The difference between bill reduction and backup power
  6. How to review a real electricity bill
  7. A simple worksheet for evaluating claims
  8. Operating costs that reduce net savings
  9. What readers should conclude
  10. Frequently asked questions

The main Energy Revolution System review describes the vendor's claimed benefits and the uncertainty around them. Here we focus on the calculation every buyer can understand: watts, hours, kilowatt-hours, and actual utility costs.

First, understand watts versus kilowatt-hours

A watt (W) measures the rate of power use. A kilowatt-hour (kWh) measures a quantity of electrical energy. Utility bills typically charge for consumption in kWh, sometimes alongside fixed fees, taxes, and time-of-use charges.

Use this simple relationship:

Energy used (kWh) = Appliance watts × Hours used ÷ 1,000

For instance, a 60-watt device operating five hours per day for 30 days consumes 9 kWh: 60 × 5 × 30 ÷ 1,000 = 9. At an illustrative electricity rate of $0.16 per kWh, that energy costs $1.44, excluding fixed charges and other bill adjustments. The numbers are examples, not claims about a specific appliance or the Energy Revolution System.

This distinction matters because a demonstration that runs a small bulb briefly may represent very little energy compared with a household's total monthly consumption. The U.S. Department of Energy's electricity fundamentals offer more background.

Estimate your household's monthly consumption

Your bill already reports the most useful number: kilowatt-hours used in the billing period. For context, the U.S. Energy Information Administration reports that the average U.S. residential utility customer bought 10,791 kWh in 2022, about 899 kWh per month (EIA: How much electricity does an American home use?). Your own figure may be much higher or lower depending on climate, home size, and heating and cooling equipment.

To see where that energy goes, list the main loads and apply the formula above:

Example loadAssumed powerAssumed useEnergy per 30 days
Eight LED bulbs9 W each5 hours a day10.8 kWh
Wi-Fi router10 W24 hours a day7.2 kWh
Laptop50 W6 hours a day9 kWh
Window air conditioner900 W8 hours a day216 kWh

The wattages are assumptions for illustration; check the appliance label or measure the device with a plug-in energy meter. The pattern is typical, though: small electronics barely move a bill, while heating, cooling and water heating usually dominate it.

What would a claimed 80% bill reduction require?

Suppose a household uses 900 kWh per month and pays $0.16 per kWh for energy. Its usage charge would be $144 before fixed fees and taxes. An 80% reduction in this usage charge would mean offsetting 720 kWh per month at the same effective rate—an average of 24 kWh every day.

Scenario Energy offset each month Illustrative usage-charge reduction at $0.16/kWh
Small, measured contribution 10 kWh $1.60
Moderate contribution 100 kWh $16.00
Large contribution 400 kWh $64.00
80% of a 900-kWh household 720 kWh $115.20

These are mathematical scenarios, not projected or verified outputs from the Energy Revolution System. We have not established an independently measured energy yield for the marketed coil-based project. Actual utility tariffs and net-metering rules can make real bills more complicated.

Four measurements you need before believing savings figures

  1. Gross output: Electrical power delivered by the device to a defined load, measured over time.
  2. Input energy: Power drawn from batteries, mains electricity, mechanical input, or another source over the same interval.
  3. Net useful energy: Output energy minus any external electrical inputs and applicable conversion losses, with energy-source boundaries clearly documented.
  4. Offset against the bill: The amount of purchased electricity actually displaced, at the customer's applicable tariff.

If a device merely uses electricity from a wall outlet to charge a battery, then later runs a lamp through an inverter, that is energy storage and conversion—not a reduction in energy consumption by itself. Losses may even increase overall electricity use.

The difference between bill reduction and backup power

Backup systems and bill-saving systems solve different problems. A charged portable power station may keep lights or a router on during an outage, but the energy must have come from somewhere. If it was recharged from the grid, its backup benefit does not imply lower monthly kWh consumption.

Solar panels, by contrast, have an identifiable energy source: sunlight. Their output depends on location, system design, weather, shading, and maintenance. The Department of Energy explains those variables in its homeowner's solar guide.

To understand where the Energy Revolution System is positioned relative to these options, read our solar and battery comparison.

How to review a real electricity bill

Take the last 12 bills and record monthly kWh, total variable energy charges, fixed fees, and seasonal changes. Check whether a rate changes at different times of day. Then document any equipment changes made during the same period: air-conditioner usage, heating, new appliances, occupancy, and solar output.

If you want to compare a before-and-after period, do not rely on a single unusually hot or cold month. A credible comparison should account for seasonality and similar occupancy. Where available, use smart-meter interval data to see when electricity was imported from the grid.

A device-specific energy meter can establish a load's consumption, but an experimental generator's overall energy balance requires a more careful measurement design and expert oversight. Do not probe mains wiring yourself.

A simple worksheet for evaluating claims

Record the following before making any purchasing decision:

Question Your figure
Average monthly purchased energy _____ kWh
Effective variable electricity rate $_____ /kWh
Documented net output from the proposed system _____ kWh/month
Energy costs incurred to operate the system $_____ /month
Expected variable-charge reduction $_____ /month
Total installed or project cost $_____

If the third line is unknown, you cannot responsibly forecast savings. A claimed high percentage does not fill that gap.

Operating costs that reduce net savings

Even a system with documented output has running costs that come off any savings estimate:

  • Standby consumption: an inverter left switched on draws power with no load attached. An idle draw of 20 W adds up to 14.4 kWh over 30 days (20 × 24 × 30 ÷ 1,000). The 20 W figure is illustrative; check the inverter's specification.
  • Charging losses: a battery returns less energy than it took to charge, so cycling grid electricity through storage normally increases consumption slightly.
  • Battery wear: batteries lose capacity with age and use, and their replacement cost belongs in the calculation.
  • Maintenance and time: inspections, replacement fuses and repairs are real costs, even for a DIY project.

Subtract these from documented output before calculating a payback period. If net output is unknown, payback cannot be estimated at all.

What readers should conclude

The correct question is not simply whether the guide uses real electrical terms. It is whether repeatable, independently documented power and energy measurements support the advertised outcome. Until those are available, treat large savings percentages as unverified marketing claims rather than as a household budget forecast.

If you are still researching the physical project, visit how the Energy Revolution System is described to work and our materials-and-tools budget guide.

Frequently asked questions

Does a 100-watt rating mean 100 kWh of savings?

No. A 100-watt load uses 0.1 kWh for each hour of operation. The hours used and the source of power determine energy and any savings.

Would a battery automatically lower my power bill?

No. A battery stores energy; charging losses and tariffs determine costs. Savings may be possible under certain tariffs or when charged with onsite generation, but not simply because a battery exists.

Can the Energy Revolution System guarantee 80% savings?

There is no independently verified basis presented here for guaranteeing that outcome. Make purchase decisions using documented measured energy, not a promotional percentage.

Read the full Energy Revolution System review

The main review covers what the digital guide includes, who created it, pricing, the 60-day refund policy, and the questions buyers ask most often.

Go to the main review